KONFIGURASI NTP SERVER

Assalamualaikum Wr.Wb
Kali ini saya akan shering bagaimana caranya untuk konfigurasi NTP server

Untuk konfigurasi skrip.

Router>enable
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.10.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#ntp
Router(config)#ntp server 192.168.10.2
Router(config)#ntp update-calendar
Router(config)#do sh clock
22:29:38.300 UTC Wed Mar 20 2019
Router(config)#



Konfigurasi pada router

Router(config)#logging 192.168.10.2
Router(config)#service timestamps log datetime msec
Router(config)#exit
Router#
*Mar 20, 22:35:39.3535: SYS-5-CONFIG_I: Configured from console by console
*Mar 20, 22:35:39.3535: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 192.168.10.2 port 514 started - CLI initiated
Router#write
Building configuration...

Share This